Many people like to install screens on the aluminum doors and windows of their homes to prevent mosquitoes from entering. We must know about the installation methods of screens. Let's follow jinxinfa Aluminum Co., Ltd. to have a look!

Step 1: assemble the square frame

Put the yarn box on the top, two air grooves on the left and right sides under the yarn box, and the bottom on the bottom to form a square frame. Then use six screws, two on the contact of the yarn box and two air grooves, four on the contact of two air grooves and the bottom of the pad, two on one side, one on the bottom and one on the side. After fixing the square frame with these six screws, we can proceed to the next step.

Step 2: select the window screen position

Then you can put the window screen where you need to install it. It should be noted that the gauze box should be vertical; the two air slots should be placed in the middle, and the space between them should be the same as that between the two sides of the window frame, so as to achieve left and right symmetry; the bottom pad should not be placed directly on the top of the window frame, but should be placed about 5cm below the bottom of the window frame. When these key points have been determined, simply fix them with clamps.

Step 3: holing and installing screws to fix invisible window screen

Next, use the electric drill. Drill at the inner side of the leather strip of the window frame, at the two air slots and the bottom. When using the electric drill, use a 3.2mm drill bit. The number of eye drilling is based on my needs, and 6-14 is enough. In the drilling position, the matching screws on the device and the invisible window screen are installed.